How much do you love that glowing green banner message that you see every once and a while on your AM server. Don't you want to replace it with your own? Don't you want to cycle through 5 or 6 different messages? I do.

This plugin uses an external file (MOTM.TXT) as the source for the banner ads to display to the clients (csay and console) at a specified time interval. Each line of the file is one banner add. You may use the ^n character to make you messages span multiple lines.

You can also add in map specific message files. These files can exist in your mod directory as the same name as the map. de_dust.txt would be used for the counter-strike de_dust map. Get it?

You can now use some colours too. I have just included the basic colours for now (red, blue, green, white, yellow, purple, random) for a test run.

View the readme.txt for setup instructions.

_New Commands:_
admin_motm_reset
Resets the message counter to 1.

admin_motm_type [ on|off ]
Get/Set the typesay mode. This WILL set the mode for all future messages. This even works accross map changes and server shutdowns!

admin_motm_time [<seconds>]
Get/Set the number of seconds between MOTM messages. Changing the value will not take affect until a map change or a server restart.

admin_motm_duration [<seconds>]
Get/Set the duration the message says on the client screen.

admin_motm_wtf
This will tell you what you did wrong. It checks for the map message file, the MOTM.TXT file and the file_read_access cvar. If you have trouble, use it.

With this plugin, you can configure AM to announce the arrival and leaving of your admins to all of the clients. The announcement is displayed as a centersay so your admins can be the envy of your HL
community.

This plugin adds two admin commands that should deter cheating in CS. It takes the original code by KaReL and [fah-q] Dio and impliments it as a plugin.

The new commands added are:

admin_bury
Plants target in the ground, makes him glow green, and drop all his goods. To bad you can't drop a grenade.

admin_unbury
Un-plants the target after a bury. Don't know why you'd want to.

admin_burytime
Get/Set the number of seconds the buried player should glow.

This plugin contains speech functions for all mods. Not only does it add a set of speech commands, it also adds the ability to speak the timeleft on the map when a users enters "timeleft" as a message.

New Commands:
admin_speak
Speak words on system of target.

admin_speakall
Speak words on system of everyone.

admin_speakteam
Speak words on systems of everyone on team.

Telefun mode, which can be turned on by administrators, allows everyone access to limited teleport commands. Administrators with level 8192 access can always access these commands, as well as admin_telesend1 & admin_telesend2

New Commands:
admin_teleset1 & admin_teleset2
Set teleport points to return to.

admin_telego1 & admin_telego2
Which allow them to teleport back to these points.

admin_telesend1 & admin_telesend2
Enables administrators to send people to the points they set.

This plugin will allow you to control the glowing of teams in CS and now TFC.

New Commands:
admin_glowall[ <color> | random | off ]
Make people glow team colors, or add a specific <color> name or RGB code, random, or off.

admin_glowteam <team#> [ <color> | random | off ]
Make team glow team colors, or add a specific <color> name or RGB code, random, or off.

admin_glowciv [ <color> | random | off ]
admin_glowvip [ <color> | random | off ]
Make VIP/Civilian glow team colors, or add a specific <color> name or RGB code, random, or off.

The sank_sounds plugin allows the server to play custom wav files when a user says a keyword. The first wav I put on my server was Homer Simpson's "DOH!" So whenever someone said, "doh" I wanted the wav to play to everybody. It has since grown into a whole collection of Simpson sounds with spam/flooding protection, but of course they can be replaced with any word/sound combination you can come up with.

In this update the plugin will read from a text file keyword/wav file combinations and when a player says one of the keywords, it will trigger HL to play that wav file to all players. Many commands have been added to the plugin so check out the included readme for full details.

This plugin will kick a player if they say more than 5 things in 2 seconds (approximately). The plugin now also logs the kicks to a file. This should stop those players who like to bind say commands to keys, and abuse them.

This plugin lets you keep the console away. This updated version from sank include a load of new mod commands.

New Commands:
admin_chatmode
Use the admin_chat command without having to use the console.
Usage: bind a key to "admin_chatmode"
Access required: ACCESS_SAY

admin_rconmode
Do an rcon say command without having to use the console.
Usage: bind a key to "admin_rconmode"
Access required: ACCESS_RCON

admin_saymode
Use the admin_say command without having to use the console.
Usage: bind a key to "admin_saymode"
Access required: ACCESS_SAY

admin_csaymode
Use the admin_csay command without having to use the console.
Usage: bind a key to "admin_csaymode"
Access required: ACCESS_SAY

admin_rsaymode
Use the admin_rsay command without having to use the console.
Usage: bind a key to "admin_rsaymode"
Access required: ACCESS_SAY

admin_ssaymode
Use the admin_ssay command without having to use the console.
Usage: bind a key to "admin_ssaymode"
Access required: ACCESS_SAY

admin_tsaymode
Use the admin_tsay command without having to use the console.
Usage: bind a key to "admin_tsaymode"
Access required: ACCESS_SAY

This plugin is for all you non-typists. It allows you to bind almost any player related command to a key.

This can only handle commands that take the player as the first command argument. eg. admin_slap <player>

I will update it at some point for the player as any parameter.

To create a bind for this you would put this in your config.cfg
bind S "admin_point admin_slap"

For a 30 minute ban, you would do this:
bind B "admin_point admin_ban 30"

For a teleport to a know location (x:123 y:456 z:789) you would do this:
bind T "admin_point admin_teleport 123 456 789"

New Command:
admin_point <admin_command> [ any other stuff you want]
This makes it easier. You can do anything you want with one admin command.

NOTE! NOTE! NOTE!


Linux systems crash issue has been fixed since 2.50c. This should work on both platforms now.

This plugin is almost a direct replacement for plugin_chat, but it's a little more lenient on how you say "current map", "next map", and "time left" ...and it also adds intelligence to detect when people ask about friendly fire, or what the server IP is, or if the server sucks...

The other main difference between plugin_chat and plugin_sank_AI is that plugin_sank_AI does NOT include admin_messagemode. Sank thought it was silly and near useless, so he left it out for the sake of speed and size. If you think otherwise, be sure to email the author.

This plugin enables friendly fire votes and auto-responses.

There is only one new command.
admin_vote_ff
Starts a vote to enable/disable friendly fire.

The other features of this script is to handle the usual chat messages ff on?, ff is on?, friendly fire on? and respond with the FF status on the server.

Remember this one? This was originally by -=CW=-KaReL*recon* but it has been updated for the new plugin format. It let's you declare two clan tags, check that everyone has them, and kick anyone that doesn't. Then it puts a password on the server.

If you load this plugin after the plugin_cs, you'll have a new voting command to work with.

admin_vote_restrict
Starts a vote to enable/restrict weapons.

This plugin enables you too quickly enable the console for someone who needs it.

New Command:
admin_console
Enable the console and bind the standard key to it for a player.

Various commands for teleporting players to you, teleporting to other players, or teleporting one player to another.

Commands:
admin_to target
Teleports target to your cooridnates.

admin_to_x target 0|1
Brings target next to you, shifted on the X axis. The 0 or 1 are optional, but will determine whether it subtracts (0) or adds (1) 96 to
your coordinates. 1 is the default.

admin_to_y target 0|1
Brings target next to you, shifted on the Y axis. The 0 or 1 are optional, but will determine whether it subtracts (0) or adds (1) 96 to your coordinates. 1 is the default.

admin_to_z target 0|1
Brings target below (0) or on top of (1) you. The 0 and 1 are optional. 1 is the default.

admin_go target
Sends you to target's cooridnates.

admin_go_x target 0|1
Sends you to target, shifted on the X axis. The 0 or 1 are optional, but will determine whether it subtracts (0) or adds (1) 96 to target's coordinates. 1 is the default.

admin_go_y target 0|1
Sends you to target, shifted on the Y axis. The 0 or 1 are optional, but will determine whether it subtracts (0) or adds (1) 96 to target's coordinates. 1 is the default.

admin_go_z target 0|1
Sends you below (0) or on top of (1) target. The 0 and 1 are optional. 1 is the default.

admin_send target1 target2
Teleports target1 to target2's cooridnates.

admin_send_x target1 target2 0|1
Sends target1 next to target2, shifted on the X axis. The 0 or 1 are optional, but will determine whether it subtracts (0) or adds (1) 96 to target2's coordinates. 1 is the default.

admin_send_y target1 target2 0|1
Sends target1 next to target2, shifted on the Y axis. The 0 or 1 are optional, but will determine whether it subtracts (0) or adds (1) 96 to target2's coordinates. 1 is the default.

admin_send_z target1 target2 0|1
Sends target1 below (0) or on top of (1 - default) target2. The 0 and 1 are optional. 1 is the default.

This is not entirely new code as it's just an adaptation of a code snippet posted on the site for the old scripting setup. Essentially, it's starts some timers at init time and announces the time remaining at 20, 10, 5 and 1 minutes left.

Aieee! Right on the heels of one update comes another. This plugin allows the server to intercept chat from players and print a response, such as "friendly fire", "admin", and other phrases. It is fully customizable to fit your preferences, just open the script. I've added slaps in addition to a server response to certain phrases. You will need to compile it before using it, of course.

Enjoy!

Thanks to...
Sank for lots of help (and code)
Kendokan for the idea.

This plugin enables gravity votes by clients and auto-responses.

Note: You might want to turn your vote_freq down to 15 or 30 in server.cfg if your going to have a lot of voting happening (FF, Grav, other etc.)

** note **
Thanks to -[MayheM]- for a couple fixes he put into this script.

This plugin allow people to vote on whether or not to have Matrix style jumping, by using either admin_vote_matrix or saying vote_matrix. Fun mode must be enabled. Also, an admin with ACCESS_FUN can type admin_matrix 1 or 0 to turn it on or off respectively.
Made by the

Here is a plugin lets you modify server files. Here are the function descriptions.

admin_grep
Search a file for matching pattern.

admin_cat
Display the requested page number from a text file.

admin_write
Append/overwrite a file line.

admin_delline
Delete a file line.

admin_resetfile
Reset a file.

admin_delfile
Delete a file.

This plugin allows players to type me or /me in their chat and the server will print it as an action just as in IRC. For example, "/me looks around" becomes "greider looks around." It only displays to players who have the same live/dead status as the person saying it.

This plugin contains a command for passing around some coffee to the dead.

This is based on admin_llama. But, instead of a llama, you can make whatever character you want.

Format is like this:
admin_char (target) (character) (say1) [(say2)] [(say3)]

Target is obviously the target (name, sessionid, etc), character is what you're changing their name to, and the different say phrases are what you'll change their speech in to. Only one phrase is necessary, but you can have up to three.

IMPORTANT - if your phrases contain more than one word, they must be enclosed in single quotes! - '

This plugin replaces the existing plugin_cs. You will still have all of the standard features of plugin_cs but you can also use weapon restrictions on a specific player if you like.

Here is a little plugin to do voting on fun mode.

New Commands:
admin_vote_funmode
Starts a vote to enable/disable fun mode.

Here is a plugin that "should be really great". It auto-detects campers, announces it, warns them (which can be turned off), and (optionally) slaps them. Fully customizable in the file, and customizable at run time through console commands:

admin_campercheck <"1" | "0">
Enables/disables checking for campers.

admin_camperslap <"1" | "0">
Enables/disables slapping campers.

admin_campert <value>
Sets the tolerance in units of how far they have to go before not being considered a camper.

admin_campertime <value>
Sets how often this plugin checks for campers in seconds. Default is 10.

admin_camperwarn <value>
Sets the amount of warnings campers get before being kicked, set to -1 to disable warnings.

admin_vote_camper
Starts a vote for whether to have camper checking on or off.

admin_camperteam <Team>
Chooses which team to check (0=all) (for cstrike: 1 is T, 2 is CT)

Saying "camper check" or "camper-check" will output the status of camper-checking. Saying "vote_camper" will start a vote for camper-checking.

Note: Still crashes on servers with bots. Do not try to use bots, hlds will just crash about 20 seconds after the game starts.

Shady Milkman wanted me to tell you to enjoy it. He sure as hell thinks it's a great plugin, and so do I.

Here is a revival of Jag's old admin_playerinfo command. yensid has been nice enough to convert it to a plugin for all you people asking for it.

Do you want to see freaky text change colour before your eyes? Do you want to feel like you are on some kind of powerful drug?

No?

Ok, fine be that way...anyway, you will love this plugin. admin_rsay will make your average csays fade from one colour to another with ease and beautie...so no need for psychedelic (sic?) drugs...:D

Commands:
admin_rsay <colour1> <colour2> Message

Note: You MUST REPLACE your current admin.inc file found in the include directory with the one found in the zip file.

This full featured vote plugin enables non-admins to start votes for LowNormal gravity, Pistols only, Disable AWP's and enabledisable ff. It also offers status auto-responses to tell the current state of weapon restrictions, current state of gravity (if low also returns numeric value) and also the current state of friendly fire.

Admins can use:
admin_vote_gravity
Starts a vote on Low/Normal Gravity.
off/on will disable/enable public use of vote_gravity.

admin_vote_pistols
Starts a vote for Pistols only.
off/on will disable/enable public use of vote_pistols.

admin_vote_awp
Starts a vote to disable AWP's.
off/on will disable/enable public use of vote_awp.

admin_vote_ff
Starts a vote to enable/disable ff.
off/on will disable/enable public use of vote_ff.

admin_awp
Toggles AWP restricted buying on/off without a vote.

admin_pistols
Toggles pistols only buying on/off without a vote.

All commands and auto-responses can be disable entirely using switches at the top of the script. Custom gravity level values can now be set(be sure to set these). Auto votes can be enabled. Public vote starts can be disable by default using switches. Also, changes now are registered in console as well as using centersay in case someone missed what it said.

Note: If your running a low gravity server, please set LowGV to your default gravity and let your players vote for normal gravity.

This plugin will replace your existing plugin_fun! It gives you more glow colors.

This is a replacement for the standard plugin_hldsld_mapvote.sma file, that contains the "votetime" command by Frizzled.

When an hlds_ld mapvote is active, this command allows clients to say "votetime" to return the timeleft in the map vote.

Returns minutes and seconds.

The Fixed Version From geist.method

This plugin will displayspeak the server timedate whenever someone says "the" and "time" in a sentence. (ie; "Hey, what's the time?")

It also includes a simple stopwatch and alarm function.

admin_stopwatch
Starts a simple counter, admin_stopwatch stops it and displays the elapsed difference. (extremely useful for timing how fast it takes one team to dominate the other... heh, or something...)

admin_alarm1set <hour> <minute> <repeat> [msg]
Sets alarm 1 for the hour and minute specified. Hour must be in 24 hour military format. Repeat is either 1 or 0, depending on whether or not you want the alarm to repeat daily. Msg is simply text to display when the alarm goes off...
example: "admin_alarm1set 23 59 1 Laf. Time for bed, you silly bear."

admin_alarm2set <hour> <minute> <repeat> [msg]
Yea, same thing.

admin_alarm1del
Deletes alarm 1.

admin_alarm2del
Deletes alarm 2.

admin_alarmstatus
Displays current alarm status.

Note:
Make sure read/write access is allowed and your vault file is set. Also, since the timer only checks for the set alarm time once a minute, it's probably a good idea that you set an alarm AT LEAST 60 seconds ahead of time.

This plugin is intended to replace plugin_fun. It adds more glow colours and adds some help so that you can see the colours that are available.

This plugin allows players to see and search thru a list of all of the maps on the server. You will need to generate a list, called tmaps.txt and stick it in your mod directory.

New commands
admin_listallmaps <number>
Lists available mapnames in groups of 10, just like admin_help.

admin_searchmaps <target>
Lists available maps that have the target in their name. If the player only supplies one letter, it gives maps that start with that letter.

This will give your llama's a voice.. funny as hell to hear your llama's ooorgle in battle.

Throw the wav files into your sounds\misc dir add the plugin to your ini file and toss the amx into your dlls folder and your off!

This plugin allows both short console commands and says to do admin commands.

New commands:
csay, psay, tsay, vsay, ssay, chat, slap, slay, bury, unbury, llama, unllama, gag, ungag

Just use the commands as you would the full versions. You can use the console or just "say" them (with their params of course).

*note*
If you want to use the bury/unbury you will need my plugin_dio_cs

This plugin basically plays an audio file then displays a csay message afterwards. ie. admin_message this is a test would play the message.wav ("message from administration") and display "this is a test" in centersay after the wav completes.

Included in this zip:

1. message.wav (place in mod\sound\misc dir)
2. plugin_adminmessage.sma (for editing)
3. plugin_adminmessage.amx (place in mod\dll dir)
4. sound.inc (place in Admin\scripting\include)
5. mapname.res (change name to a map on your server and place in mod\maps dir)

New Admin commands and features that let you manipulate the users.ini file from the console. I use this to give my clan leaders the ability to add clan members for reserved slots and it saves me from manually editing the users.ini file and then running HL and admin_reload (or resetting the server)

admin_user_access <name in users.ini> <new access level>
Change access level of existing user.

admin_user_add <name in users.ini> <password>
Add a new users with password giving default access (specified in plugin, right now simply provides "reserved slot") Defaults to 32769 access level.
admin_user_del <name in users.ini>
Delete an entry.

Some changes were added to this plugin by LA.

1. Temporary file name changed from "users.new" to "users.tmp".
2. Uses boolean "Found" rather than linenumber stuff. (Personal preference)
3. Makes use of "users_file" cvar, rather than blindly looking for users.ini in mod directory.
4. Deletes temporary file "users.tmp" at end of functions.
5. Changed "#define DEFAULT_ACCESS" to a text string, did not work properly on Windows system.
6. No longer reload()'s, or copyfile()'s when there is no need to do so.
7. Also blank arguments can cause problem, should be handled now.
8. Changed some messages to be more informative, fixed punctuation. (Pet pieve)
9. Now uses ':' to seperate name from access or password, instead of whitespace.
   
   E.g. "admin_user_add Multi word name:qwerty" will successfuly add a new user with the name "Multi word name" and password "qwerty" without using quotes.

This plugin allows you to enter a private conversation with a target, and that target does not need to have any special access level. It also allows you to create up to 99999 private chat rooms, which you can have as many targets invited to as you wish.

New Commands
admin_private <target>
Enter private conversation with target.

admin_unprivate <target>
Leave private conversation with target.

admin_privateroom <room#> [<target>]
Put <target> in private chat room <room#>.
No <target> does self.

admin_unprivateroom [<target>]
Takes <target> out of private chat room.
No <target> does self.

This plugin loosely based on admin_TFC.sma, allows forced team balancing by denying team join/switch to teams that would become uneven. In addition to this, the plugin also notifies the players in the server when teams are uneven (due to people disconnecting, etc).

This plugin currently only works in mods that have two teams, since I don't know how to get the number of teams in adminmod.

New Commands:
admin_balance on|off
Sets the forced team balancing.

This plugin enables|disables the taunt messages in Global Warfare that people so often like to abuse.

(ie: "say_outloud 150" <- the evil Homer sound)

New Commands:
admin_gw_taunts on|off
Toggles taunts in say_outloud and say_radio commands.

What can I say. This contains a mix of commands.

New Commands:
admin_vsay2 <question> <response1> <response2> <response6>
Similar to admin_vsay, but rather than asking a Yes/No question, you can have up to six responses.
Ex. admin_vsay2 'What food does the admin like the most?' Cheese Bacon Spam

Single quotes must be used.

admin_mslap <target> <# slaps>
Slaps <target> multiple times. Only the last slap sends <target> somewhere (plus you get a console full of non-precached sound errors)

admin_glow2 <target> <R> <G> <B>
Makes <target> glow a specific RGB color. Can be used on a specific person.

admin_noimmune <command and params>
Ignores immunity for this one command.

admin_freeze <target>
admin_unfreeze <target>
Freezes/Unfreezes <target>. Like admin_bury/admin_unbury, but is mod-independent.

Admin_stop is a plugin I designed mainly for use in clan matches. It can be used to stop teams or users from moving. This is particularly handy for me because when trying to practice with my clan, the attackers usually get bored waiting for the defence to set up and they attack, which can be very annoying.

New Commands:
admin_stop <USER> 1|0
Stops a targeted user from moving even when they die and respawn.

admin_stopteam 1|2
Stops a targeted team from moving.
(same as above but targets at a whole team rather than a single player)

Admin_StartTeam 1|2
Gives a team back the ability to move again.

This command can also be used to punish players like TK etc.. It stops a user from being able to access there console when there in Stop mode and also stops them from shooting or/and pressing the escape key.

Note
All these things it disables are re-enabled when a user is allowed to move again. Stops are now logged to stoplist.txt

This plugin let's you declare two clan tags, check that everyone has them, and kick anyone that doesn't. Then it puts a password on the server, and restarts the round in 10 secs. It then starts a timer that displays the timeleft every minute or with the admin_matchtime command. The timer can be turned off and with the admin_matchtimer on/off command.

Commands:
Admin_clanmatch <clan tag 1> <clan tag 2> <serverpassword>
Activates timer, kicks non clan players, passwords the server, restarts the round. The match roundtime length is the length of EACH of the 2 rounds you will play.

Admin_secondround
Starts the second round (use when prompted).

Admin_endmatch
Ends the match.

Well, if you don't know about the MAT, you haven't been around the Admin MOD forums very long. The MAT is a thread started by Bud-froggy that has turned into a place where most of us say things for no apparent reason, ridiculous things happen, and we have decided to try to make the thread one of the longest in Inet history (or at least in AM's, laf) . It is where we go to ramble and flame, tell jokes, discuss not so serious issues, and basically have fun. This plugin is the result of the thread. It sums what the thread has become: out of control. The plugin make all clients say thing that really make no sense, at least to those not familiar with the thread. I will try to update the plugin as new catch phrases come along, as a reminder of the true essence of the thread.

_New Command_
admin_mat
Makes everyone say useless but fun comments. :-)

This is another replacment for the stock HLDS map vote included in AM. This one will display the winning map so far at timed intervals during the vote. It also contains the votetime function from GeSpot.

This script provides a "nice" server shutdown message (30 secs) before exiting HLDS. By default, the only people authorized to use this script are "rcon access" admins.

This plugin take the contents of a text file and print it to the user when they connect. The text file can have "macros" that will get replaced with real data as it prints to the client. If it finds it can't read the file, it will automagically set file_access_read to 1 and then set it back to 0 when it's done.

Here is the list of macros supported and what they mean:

1. %USER% Client Name
2. %IP% Client IP address
3. %MAP% Current Map
4. %NEXTMAP% Next Map
5. %PLAYERS% Number of players
6. %MAXPLAYERS% Number of max players
7. %TEAM=n% Number of players on team n where n is a number
8. %MONTH% Current month ie. January
9. %DATE% Current date ie. 15
10. %DAY% Current day ie. Monday
11. %TIME% Current time ie. 17:00
12. %YEAR% Current year ie. 2001
13. %CVAR=n% Value of n where n is a CVAR ex: CVAR=hostname
14. %TIMEINTO% Time into the current map in minutes
15. %TIMELEFT% Time left on the current map in minutes

The plugin is designed to work with two bots, Podbot and Realbot. The commands are run as rcon commands are ( from the server console ) meaning this allows users with the correct access level to control the bots on a server wthout the need to give them rcon access or admin_rcon.

This plugin will allow clan members to talk to each other in game without public members of the game seeing it. I have set the access level to the same level as admin_gag and admin_ungag, change it if you please. Only people in your user.ini file that have access to admin_gag will see or be able to use this feature. I created this program to help us watch for cheaters, not to be used as a cheat.

_Commands_
admin_clanchat [ msg ]
Send the msg to all players with admin_gag access level.

Modifications to plugin_retribution:

Now the plugin slaps all those pesky, foul mouthed users.

Modifications to plugin_democracy:
Can now vote for high gravity.

So much for bunny hoppers. (-;

OK, I wrote a plugin for CS (sorry, it's CS-only) servers who don't want the awp to be used. Instead of restricting the awp, I have this plugin that gives them warnings. First it slaps them to 5hp, second buy, it kills them. The third time they buy an awp, it will kick them. If they come back, it will ban them for 15 minutes the next time they buy an awp. I have the code that will allow them to be banned permanently if they've been banned once before, just commented out in the plugin.

The reason I don't restrict the awp, is the same reason that god didn't move the tree of knowledge out of the garden of eden. He knew that they'd eat from it, but left it there anyway, to tempt them. Guess it all just boils down to the fact that admins wanna have fun! =)

So, two new commands added:
admin_awpcheck (1|0)
Turns checking on or off

admin_awpstat
Shows running total since server started of all slaps, slays, kicks, and bans for awp-buyers...

New for this update:

1. Showbriefing workaround of weapon restrictions.
2. It kicks anyone who manages to get a shot fired off (and kill) with the awp.

I finally got this baby updated the way I wanted it originally. Same script, it just plays this wav first.

This updated shutdown script provides a "nice" server shutdown message (30 secs), and an audio file before exiting HLDS. By default, the only people authorized to use this script are "rcon access" admins.

This is very simplistic, it allows all dead people to see what alive people say (no teamsays), and alive people to see what dead people say, this is upgraded over my old version and doesn't turn ALL text yellow, only the text that a person wouldnt normally see due to their alive/dead status.

admin_seeuser Doesn't insert the name as the first parameter to the command. Instead it looks through the passed commands for the following text strings and replaces them with the appropriate data.... $user, $team, $wonid, $sesid, $slot, and $dead.

It also has a 2 part function for just locking a user's data into a companion function that takes the same arguments.

admin_lockuser is a command that doesnt take any arguments, but instead locks in the userdata and tells you whether it succeeded or not, then there is admin_lockeduser which takes the user data for the user you locked in and replaces the same strings that admin_seeuser does.

This plugin allows the admin to lock the teams. It doesn't allow anybody to be able to switch teams and is made for clans that want to play 2v7 or something.

There are four commands, two for removing a sentrygun, two for removing a dispenser:

admin_detsentry <target> - Removes the target's sentry gun.
admin_detsg <target> - Removes the target's sentry gun.

admin_detdispenser <target> - Removes the target's dispenser.
admin_detdisp <target> - Removes the target's dispenser.

This script allows you to change the mp_footsteps and mp_flashlight cvars without requiring access to rcon. If you do not pass a parameter to the commands the value is toggled.

admin_footsteps <0> or <1>
1 turns footsteps on, 0 turns them off.

admin_flashlight <0> or <1>
1 allows flashlights to used, 0 disallows flashlights.

This plugin will read from a text file keyword/wav file combinations and when a player says one of the keywords, it will trigger HL to play that wav file to all players. It allows reloading of the file without restarting the current level, as well as adding keyword/wav combinations from the console during gameplay. If it finds it can't read the file, it will automagically set file_access_read to 1 and then set it back to 0 when it's done.

note:The original author is Sank, Terran did some minor mods to stop dead from haunting the living.

This plugin will allowo you to vote for banning a player.

Commands
admin_vote_ban <name|wonid> <time>
Start a ban vote on a player. Zero time is perma-ban.

This plugin is a slight re-write of the timerem plugin. Timerem has a few bugs related to getting the current time left on a map and dealing with trying to execute commands to bots.

This is now v1.9a

This plugin let's you declare two clan tags, check that everyone has them, and kick anyone that doesn't. Then it puts a password on the server, and restarts the round in 10 secs and sets all match server settings. It can then start a timer that displays the timeleft every minute or with the admin_matchtime command(also through the use of the say commands). The timer can be turned off with the admin_matchtimer on/off command. Then the server settings can be restored to the normal game paly settings and the server name restored to normal with admin_endmatch command. Scores can also be made to display each round.

I made this plugin so normal clients can print csay and tsay messages but with there name attached to it so admins know whos printing messages and if turned off default access in server.cfg clients cannot use this command.

Commands:
admin_msay <message>
Prints a csay message with clients name attached.

admin_tmsay <message>
Prints a tsay message with clients name attached.

This is a updated plugin_base.sma I just added some more colors to admin_tsay and admin_csay

They new colors are Terq (Tercouice), Skyblue, brown, lime, orange, teal, pink, aqua, navy (Navy blue) and olive.

I created a new admin_kick (a modified plugin_base.sma). The difference between the new admin_kick and the old one is that this one remembers the last five people kicked, and warns you if they come back, even under a different name. It also tells you what the name of the player was at the time he was kicked. It looks like this:

(Warning) <new name> has been recently kicked. (<old name>)

So if I was on a server under the name Psychosis, you kicked me, and I changed my name to RandomGuy before returning, it would say this to all admins when I reconnected:

(Warning) RandomGuy was recently kicked. (Psychosis)

The Republic Plugin allows client users to vote_camper, vote_afk, and vote_ban people using the vote system. Vote_camper votes to kill someone, vote_afk votes to kick someone, and vote_ban votes to ban someone as long as the ban time is not infinate and less than 10000 minute (approx. one week). There are some gimicks though to avoid abuse. If the vote fails, the user who initiated the vote is banned for a certain amount of time depending on the vote he initiated. Also, these votes cannot be commensed if less than six people are playing to avoid biased judgement on small servers.

This plugin will allow you to set certain commands on your server

Commands:
admin_cheats 1|0
1 = sv_cheats allowed on server.

admin_maxspeed <speed>
Default Speed is 320 Maximum allowed speed is 400 after 400 it doesn't
speed up.

This plugin is for using some commands only avaible through the listenserver.cfg or server.cfg but now you can change these from the game as long as you're an admin.

Commands:
admin_evap 1|0
1=Dead people only see black screens.

admin_c4timer <time>
Default 45 seconds TIME IN MINUTES.

admin_hostagepen <pen>
Max amount of hostages a player can kill before kicked.

admin_chasecam 2|1|0
2=Camera never moves when dead.
1=Chase camera mode.
0=Free look (any mode).

Here is a plugin that will allow you to change your freezetime, roundtime and startmoney.

Commands:
admin_freezetime <time>
Sets freezetime (set in seconds).

admin_roundtime <time>
Sets roundtime (set in minutes).

admin_startmoney <money>
Sets startmoney (Min: 800 Max: 16000)

NOTE: Freezetime is how long your frozen at round startings
NOTE: Roundtime is how long each round is
NOTE: Startmoney is how much money everyone starts with

This plugin will allow you to edit your server rates and server sendvelocity.

Commands:
admin_maxrate <rate>
Edits servers maxrate.

admin_minrate <rate>
Edits servers minrate.

admin_sendvelocity 1|0
Edits sendvelocity (Low Lag Graphics = 1)

NOTE: When you run this throu the compiler there will be Loose Indentation WARNINGS dont mind them. They're nothing bad.

This plugin will allow you to vote for funmode on/off

Commands:
admin_votefun

It will open a vote to turn on funmode or turn off funmode.

This plugin will kick inactive players after a number of warnings. The inactive players are determined by those considered to be on team 0 (zero). this is the team number when a player has not chosen a team.

Note: We do not allow spectators, so it's possible this plugin will not work on servers that do.

This plugin blocks swearing when players try to creatively type it in (e.g. sh it).

The code is contains an initial comment explaining how the plugin works. One key thing to note, it needs to be placed before plugin_retribution in your plugin.ini file

This plugin lets you define triggers for certain messages that people on your server can use. The triggers are defined in a text file along with the messages they correspond to.

An example of a trigger would be -cq for come quick, so the player would type -cq in chat and "come quick" would be displayed as the message from the player.

I suggest reading the Readme.

This plugin lets you stop users ability to chat (you can stop team chat as well by commenting out a line in the sma). I have no idea why anyone would wan this but it was fairly popular on the forums so I thought I'd submit it anyway.

This is a script for all the admins who dont like hwguys running around killing all the innocent snipers :) if you want another classes script.

I've made an updated consgreet, and i think you might wanna check it out and put it on your server (it doesnt say the MOTD.txt because that sorta bothers me, because i use past tense.) instead it plays the MOSERVERSTUFF.txt

This plugin will allow you to restrict all TFC classes with votes or without votes.

Commands:
admin_vote_scout
admin_vote_sniper
admin_vote_soldier
admin_vote_demoman
admin_vote_medic
admin_vote_hwguy
admin_vote_pyro
admin_vote_engineer
admin_vote_spy
Will open a vote to restrict that class.

admin_scout
admin_sniper
admin_soldier
admin_demoman
admin_medic
admin_hwguy
admin_pyro
admin_engineer
admin_spy
Will restrict or enable that class.

So if your server has too many of 1 class vote restrict it or just restrict it.

You say "roll the dice" and you get a total of two 6 sided dice (admin_games must be on or 1). Here is a description of the prizes obtained for wich totals.

Godmode = 2 & 12
Noclip = 3 & 4
Death = 7
Slap = 5 & 6
Glow = 8 & 9
Stuck = 10 & 11.

This is a fun script, however it's sort of buggy, sometimes granting other players your prizes. I believe this to be in need of some sort of UserIndex code. Though I don't have the knowledge required to develope it.

Modifications wanted, send revisions of plugin_dice.sma to lightfoot_sf@yahoo.ca

This is a small plugin I wrote. It lets the people who have access to it (variable) start a vote, so the players can decide if the want to slap a certain player. Can come in handy if someone is camping. The number of slaps, the access level needed and the vote ratio can be set at compile time. A readme file is included in the zip archive.

IMPORTANT
You must have:
exec listip.cfg in your server.cfg (or listenserver.cfg, as appropriate) or autoexec.cfg of your server to load the stored IP addresses.

The command for this plugin is as follows:
admin_banip <target> [<reason>]

Bans the ip address of the target. Optionally, you can include the reason to be displayed when they are kicked.

<target> indicates a specific player's Session ID, WONID, name, partial name, or IP address.

[<reason>] is an optional parameter you may add. It is the reason you would like displayed in the users console who is banned and kicked.

*NOTE* you can use admin_unban to remove an IP address from being banned, so there is no need for an admin_unbanip.

This plugin currently contains commands to help prevent various cheats that register their own cvars.

enough said.

Ever wanted to see if some guy had no recoil because he his bullets seemed very flat? Plugin_forcefire will force players to jump, then fire at the direction they were facing for a continuous 4 seconds. During that time, they cannot move, jump, nor change the direction they look. After the time all controls are restored. This is also good for forcing stubbern Terrorists to plant the bomb when they are by the bomb site! Comes with bmps to compair to. Please note that yensid's plugin is excellent at banning the common cheater, it cannot detect no-recoil scripts and cannot detect new cheats.

Tip: almost all cheats require no-recoil in order for aimbot to be effective. admin_ban priviliges required to use.

Adds two commands:
admin_vote_slay <target>
Starts a vote to slay target.

admin_vote_stack <target>
Starts a vote to nail to the ground.

These may be edited:
#define SLAY_RATIO 80 a number between 0 and 100
#define STACK_RATIO 80 a number between 0 and 100

The access, users need to use these commands: ACCESS_VOTE_KICK

This gives your server the appearance of having an intelligent bot... or not :)

This plugin is used like the rest of the say commands.
admin_bsay <message>
When you use admin_bsay hello world your users will see
Server Bot: hello world

Edit the sma file to name your bot what you wish.

This plugin was adapted from plugin_sank_antiflood.sma by Sank.

There are no functions included in this plugin. It is a flooding filter so people don't sent too many commands to the server in a short period. It determines that a user is flooding the server if they say approximately 10 things in less than 2 seconds.

This plugin give admins the ability to limit the people that may use spectator mode in TFC. This plugin will enable spectator mode on the server.

Admins with 1024 access can use and force players into spectator mode. Normal users will be allowed to leave spectator mode but cannot enter it by themselves.

admin_spectate <user>
Puts a user in spectator mode. This command requires 1024 access.

This is a modified version of the default expressive-llama retribution. Alters the censorship method from removing the whole line and replacing it with some phrase to:

1. replacing the parent string that contains an offending string with @,#,$,& or * symbols.
2. replacing only the offending string/substring with * using censor_words() function
3. replacing the whole line with an amusing llama-ish word/sound.

All it really does is allow an admin to turn off a users VoiceComm, so they can't speak to the rest of the players. Really nice for those guys that leave the mic on and play a song or something.

There are three commands included in the plugin:

admin_mute <target>
admin_unmute <target>
admin_vote_mute <target>

Pretty self-explanatory.

This plugin will give you the right to Vote to llama, gag, unllama, or ungag someone. Access required to use these commands is: 2 LoL just out of reach of the server clients.

This is to make sure that not everyone is running around your server gaging and llamaing everyone they dont like

Commands:
admin_vote_gag <name>
Votes to gag someone.
admin_vote_ungag <name>
Votes to ungag a gaged person.
admin_vote_llama <name>
Votes to llama someone.
admin_vote_unllama <name>
Votes to unllama someone.

I made this script so the public can choose what happens to people on the server.

This pack of plugins will log who used what commands into a file named 'logs.txt' this pack has every default plugin that comes with AdminMod so just replace the old version of the plugin with the new version and place 'logs.txt' into your cstrike folder.

And now you can see who has been useing what commands on your server i added this log feature so server ops would know if other admins where using to many commands.

The commands are the exact same and work the same way but now log the commands. Example:
[ADMIN] -TaR-Sharpsniper used admin_command admin_kick Hacker.

And also logs peoples connects and disconnects and replaces admin_command with admin_cheat when someone uses a admin_cheat. Enjoy!

This script replaces the admin_vote_map() function in the plugin_base. It allows people to nominate more than one map to vote on, so no more times when some annoying **** votes for de_dust AGAIN, people can have a choice! Each user can pick from a menu as follows

Which map?
1) No change
2) de_dawn
3) cs_militia

Where each map is nominated by a user. It will not let multiple entries for the same map. Users are not restricted from nominating more than one map. If it becomes a problem it is something that can be added at a later date.

I also included the ability to limit the maps people can vote for. The script maintains a list of the REMEMBERED_MAPS (defined in the script) most recent maps in lastmaps.ini. Any maps in this file it wont let you nominate as they won a vote to recently. The function may be useful to someone.

This is a response to a request to be able to cancel map votes on the requests forums. To make it I edited Alfred's plugin_base, but I made it so that using it does not mean you have to replace your plugin_base, just follow the instructions and it works. It adds the function admin_cancelmapvote to the original map vote style, so during a vote the admin can force it to ignore the result. Full readme included.

This plugin allows a vote to have a sniperwar on a server. Any player may type admin_vote_sniper into console and a vote for it will appear.

This modification of a default AdminMod plugin allows an admin to cancel a user initiated Kick or Map vote. It gives this access at level 128 by default. It is designed for dealing with llamas that initiate votes for no reason! When canceled it will say "Vote cancelled by admin." It will only effect an inprogress vote (it will not cancel any future vote).

It includes both a modified plugin_base.sma for people that haven't changed their existing one as well as the component changes with instructions for adding them to your existing plugin_base.sma file.

Command:
admin_novote
Forces a Map or Kick Vote in progress to fail.

Plugin that allow the players to have a vote that punishes a player in a new way. They can vote to put an annoying player in prison which is a different place in each map that disables or puts a player in a spot he doesnt want to be. Activate by typing admin_vote_prison <player> into console.

This plugin will display a custom message to a specific client or clients as they connect, in effect paging them. To alert the user of an incoming message, one of six built in sound files (no extra files to download!) will be played shortly after they connect. Users can be identified by Exact Name match, Partial Name match, IP Address, or WONID. Names are not case sensitive. More than one message can be added for the same user. Admins will be able to add a message from their console during gameplay.

New features: The sound played and text displayed while sending messages to the user are now fully customizable.

Commands featured in this plugin:
admin_pager_add
admin_pager_delete
admin_pager_list
admin_pager_off
admin_pager_on
admin_pager_reload
admin_pager_resend
admin_pager_mode (new!)
admin_pager_msg (new!)
admin_pager_sound (new!)

This plugin checks to see if clients connect with a mygot name and it also checks every minute to see if they are playing incognito and they change their name midgame. The result is auto-permanent ban.

I feel it is better to know if they are coming on. Because if you just block their tag using the password protection method they just log on with a variation on that name and run rampant on your server until an admin does something about it.

This plugin will teleport the subject to a location where they will be subject to fall damage. It is written as a punishment for TKing, but can be adapted for any purpose by changing the tsay message.

See code comments for usage, and customization.

(This plugin is no longer supported by it's author.)

This plugin will bring up a vote for 5 random maps at the end of the round or when someone says 'rockthevote', etc., instead of open voting. You may also specify maps to be included in the vote. This is a direct replacement for plugin_hldsld_mapvote.sma. It will use all of the cvar settings for that plugin. It is highly recommended you remove that plugin if you are running this one.

This plugin combines messages what player will see on the console screen when he is connecting to the server and information visible to all other players already in the game.

I used -[bluebird]- and -[Sharpsniper]- plugins as base for this modify one. First one (bluebird) has a small flaw: when player was reconnecting, then server recognized him as player present in the game. I fix this by comparing players name reported by Playerinfo() function with HLName from plugin_connect() function. Everything else is "touch-up".

In the second plugin (from Sharpsniper), I changed what information is display, when and to whom. Pattern is as follow: message to all players in the game that new player is connecting to the server, then greetings only visible to just connected player (of course this message is time dependent - total 55s delay 15+40). When player is disconnecting from the server then everybody is notify.

Original material:
plugin_conmsg.sma (by bluebird)
plugin_sharp_cconnect.sma (by Sharpsniper)

With this plugin you can vote for any gravity you want not like previous versions where you could only vote for Low or Normal Gravity. So it is much more handy and more versitile than the older gravity votes.

Commands:
admin_vote_gravity <gravity>
Votes to change to selected gravity.

Use this command the same way you would use admin_gravity so just enter the gravity ammount you want.

Example:
admin_vote_gravity 300
Votes to change gravity to 300.

This plugin will let you change many of the commands specific to Day of Defeat 2.0. DOD 2.0 is not an update, its a new mod so I have worked long and hard on creating this from scratch. I have precompiled the plugin both for linux and windows. Each command has its own helpline, but I have also included a readme file that explains in more detail on what the commands do as well as how to install the plugin.

This is for your 24/7 de_dust servers. This plugin will display the current map's start date & time and/or elapsed time at user defined intervals or when someone says "runtime".

admin_runtime_time <minutes>
Gets / sets the display frequency of the map time.

admin_runtime_style [ 1 | 2 | 3 ]
Gets / sets the display style.

Examples:
1. This map running since: 12:00 AM
Thursday, December 15 2001

2. This map running for: 11 days : 7 hours : 29 minutes

3. This map running since: 12:00 AM
Thursday, December 15 2001
11 days : 7 hours : 29 minutes

Note: The frequency and style parameters are stored in the vault file if read/write access is enabled. Otherwise it uses the default values of 45 minutes and style #1.

I like gambling. Mostly I play penny poker, but it's still fun. A player may choose to gamble by saying either roll the dice or I feel lucky. The total of the two dice range from 2 - 12, and the rewards are as follows:

2 or 12 Godmode for 10 seconds
3 or 11 Noclip for 20 seconds
4 or 10 Stuck for 10 seconds
5 or 9 Glow for 15 seconds
6 or 8 Slap
7 Death

Once you have gambled, you cannot gamble again for at least a minute. My most deepest thanks goes to [SCR]Lightfoot-TA- (lightfoot_sf@yahoo.ca) for he was the one who came up with the idea and wrote the original, however buggy it may have been.

This is my version of sank's antiflood plugin. Rather than kick the user, it makes them execute "disconnect". It works really well on my LAN server, not sure about in a public server where lag exists. It uses the same FloodLog.txt with minimal difference in entries (dropped instead of kicked). Anyways, the zip doesn't contain any readme files, just compile and fire away.

This plugin will allow you to change the mapcycle file depending on the day of the week. All the docs are in the zip.

If a player connects with a name that contains one of the entries listed in the text file, then they will get banned. If a player changes their name to one of the offending names, they will also get banned.

In the event that this plugin bans somebody, it will write a log to its own log file, NameBanLog.txt which contains entries with Date, Time, Name, and WONID:
01/02/02 12:23:34 mygot<54321>
01/02/02 12:34:56 myg0t<12345>

This is replacement for plugin_democracy that includes voting and status for shotguns only, smgs only, and rifles only though rifles only restarts the round and sets mp_Startmoney to 16000 so people have enough money for it).

I found that the antifloods offered on the AScript site caused lag on my server when people connected (inordanat amounts of lag) I also added a mute timer that is easy to understand, i also added correct -1 to user indexes, considering that an array starts at index 0 i don't know if this matters or not in the cs world, but seeing all the MAXPLAYERS fields in array brackets really bothered me :-P

This plugin will allow server admins to slay everyone on the server at one time its basicly just to be evil and piss off everyone because they can do anything back at you, but enjoy.

Commands:
admin_slayall
Slays everyone on the server that doesnt have immunity access.

The slot hound script will detect if the players on your server are inactive by tracking how long they are dead, and how long they are in the exact same location. You can set the maximum amounts and when exceeded the player will be warned, then the next minute they will be kicked. Please refer to the readme file for installation instuction and command information.

Someone asked for it on the admin-requests forum. This allows you to log all Admin commands to a text file, just in case you are suspicious that your admins are abusing their powers.

Features are as follows:

• Support for AM 2.50.37 and newer in the new releases.
• Supports for AM 2.50.26 and should support 2.50.09.
• Added the "admin_adminlog" command. This allows you to change the settings from the HL console and they are stored in the vault.
• For the ultra-paranoid, I added the ability to make it Silent. This hides all the commands so any admins will not know it is running. Requires a map change to switch this mode though.
• The ability to log to one file, one file per admin, one file per day and one file per admin per day (for those with heavy (ab)usage). It still uses Safe Names (with no non-letter characters in filenames).
• "Admin 0" commands are filtered out, so you can run anything from the console or from within a plugin without this detecting it. If you want to monitor your admins, try monitoring admin_point and admin_rcon too....
• Since v0.90, no small coding is required. Commands for monitoring added via a text ".ini" file and features are enabled via the vault or the "admin_adminlog" client command

This was created after a post on the admin-mod forums complained that people were using the vote command to give messages to their friends. This plugin blocks the vote function and, if it is a valid player, initiates a kick vote against them. There are options to tell the plugin to not say what the number was and an option to allow it to carry on as normal while still saying the callers name. Therefore, I think it covers most of the bases. A readme is included and the code is commented.

I made this plugin from plugin_timerem2, but what it does is on like 1 map servers such as all de_dust like my server instead of restarting the whole map after however long you set it for it just resets the scores, and starts a fresh new game which is very helpful if your box is slow and takes awhile to load a map or what not, anyways there you go, enjoy.

I live on a LAN and people play on my server.

We have static IPs so I wanted something that would log who was being lame. That is where this plugin comes in. Admin_warn adds another warning to the user's details and punishes them as it goes. Each punishment is more severe than the previous one but the general list goes 1 ->2 slap, 3->4 bury, 5 -> 6 slay, 7 -> 10 kick, any more and they get banned. It is colour co-ordinated too, with later warnings taking a different colour (green, followed by yellow followed by red). So as not to leave people out if they dont want to ban by IP, I edited it quickly to ban by WonID.

Commands:
admin_warn <name> <reason>
Adds a warning to the users total. YOU HAVE TO INCLUDE A REASON

Here is a plugin that I made as an addition to plugin_cs.

Here is what it includes:
admin_buytime <time>
Changes the ammount of buy time before the round starts.

admin_c4timer <time>
Changes the ammount of time before the c4 explodes.

admin_flashlight
Toggles the use of the flashlight on and off.

admin_footsteps
Toggles footsteps on and off.

admin_roundtime <time>
Changes the ammount of time for a map.

admin_startmoney <time>
Changes the ammount of money that a player starts with.

admin_freezetime <time>
Changes the ammount of time before the round starts.

admin_startmoney <time>
Changes the ammount of money that a player starts with.

admin_tkpunish <time>Toggles team killing punishment on and off.

A modified version of BB's DOD plugin with new DOD specific commands. This plugin also contains the DOD 2.0 commands for clan matches and updated class limit commands. You got to have access level 2 to change theese settings.

New commands:

admin_clan_match
admin_clan_timer
admin_clan_start
admin_alliesmg
admin_axismg
admin_clan_respawntime
admin_tkpenalty
admin_teamlimit
admin_deathmsg
admin_chatmsg
admin_voices

The zip file contains a readme, source and precompiled versions of the script.

This plugin will tell users which classes are limited and if so what they are limited to. this plugin is helpful on servers that change the class limits by map. Just type admin_whatclass to activate plugin.

This plugin allows you to configure a valid nick based on a clients WONID. If the client changes nicks, the server will tell you about it.

This plugin will keep track of the connected clients IP addresses and allow you to view them with the following command:

admin_showip
Shows the ip addresses of clients.

I made a plugin for admin mod that is basically a joke on my server. We all used to play old NES games and remember the codes still. With my plugin, you type those codes in and then get some good effects.

Here are the codes:
Godmode "upupdowndownleftrightleftrightbastart"
Noclip "updownupdownleftrightleftrightabstart"

Try it, it's fun :)

This plugin was originally written by Bryan Clay.

It has been rewritten by [TCSUK]Meddler (Paulo Rodrigues) to allow multiple coordinates per map and a few other bits and pieces. Best of all you dont need to recompile to add new map coordinates. Use it as a more sophisticated version of admin_bury.

admin_vote_prison <target>
Essentially the same as the original and initiates a vote to put a player in prison.

admin_prison <target>
Puts a player in prison.

admin_prison_all
Puts all the players in prison

admin_prison_write <description>
Saves the current coordinates to a file along with a descripion

Are you tired of those people running and jumping and shooting and knifing while you are trying to setup a practice or a match? Well I was. These commands will not screw with anyone's binds and I felt it was safer than doing something that did. All it does is bury a whole team at once or unbury them. After dropping all their weapons so they can't shoot. Be aware this plugin is pretty simple and if someone is in the process of jumping off a tall building or something at the moment then they may not be buried because all it does it get their current position and then transport them down a certain amount. You can do admin_stopteam 1 more than once though and then you will have to do admin_startteam more than once too. Doing it in the beginning of a round is best.

It will only store IDs if they don't exist on the server already (However, if the same ID but different NAME, then ID IS stored. Hence all the players 'fakenicks' will be stored along with their IDs).

This plugins adds the command admin_ss <user> that takes a snapshot on the user's computer. It can be used against cheaters.

This plugin will display Counter-Strike specific server information to the connecting clients.

This plugin changes the Cheating Death-Compliance from required to optional and back again.

This is plugin to remember player's original name define by his WONID and be able to recover it even if he changed his name. Should help eliminate peoples talking bs about clan, server etc. under new name and thinking that nobody can recognize them.

Commands:
admin_who <player>
To check player.

admin_addname <player> <name_to_remember>
To add player to the list.

This archive contains three files:

- plugin_dod_fog
- plugin_dod_sniper
- plugin_dod_mg

To start a vote say:
vote_fog or vote_mg or vote_sniper

With plugin dod_fog you can start a vote to enable fog
With plugin dod_sniper you can start a vote to disable sniper
With plugin dod_fog you can start a vote to disable mg

This plugin closes the HL of target player with the following command:
admin_quit <targetname>

I made an newer version of plugin admin_quit. The Access level is now 128 (admin_kick) and Admins (with protection flag) are now protected from this command.

Every hour and half hour the date and time is printed to the screen and a female voice announces the time. Also, the default sma includes a male voice announcing it's 4:20 am/pm.

Now includes a silent version too.

Are you tired of players loading the same maps over and over again? This plugin can track the last 5(or any number) maps played and not allow players to vote for those maps.

say maptracker
Displays maps that can not be voted on at this time.

admin_maptracker
displays maps that can not be voted on at this time.

admin_maptracker [number]
set the number of new maps before one may be repeated.

This is a plugin that allows clients to say 'up' and turns noclip mode on for them. It adds vote_noclip, admin_vote_noclip, admin_noclip, and, of course, say up/down.

Added "ZeusMode" (godmode and noclip combined)
Winners of ZeusMode, GodMode, and Noclip will now glow too
Replaced Slay with human time-bomb -- need
In this version, timebomb can kill bystanders
Replaced Slap with slap disease -- possibly fatal
Enhanced Glow by having it potentially affect health
To Stuck I added a slap at the beginning -- looks funnier
Dead players cant gamble.

Player can become a timebomb by saying "kamikazi" in chat. Admin can disable the kamikaze function with admin_timebombs 0 and turn it back on again with admin_timebombs 1. Admin can make any live player without immunity into a timebomb with admin_timebomb .

Commands:
say: kamikaze
admin_timebombs 0|1
admin_timebomb <target>
admin_vote_timebomb <target>

This plugin allows users to search thru all the maps on your server. You will need to create a file called "tmaps.txt" and place it in your Mod directory. This file should contain a list of all the maps you have available to play. The easiest way to create this file is to copy your maps.ini file, rename the copy to tmaps.txt. Add 8 blank lines to the end of tmaps.txt and save it in your mod directory.

Commands:
admin_maplist <number>
Returns a list of 9 maps starting from number.

admin_search <target>
Returns up to 9 maps containing the search target

admin_map_help
Instructs on the use of ejl_listmaps.

This plugin varies sv_maxrate based on the number of players on your server while staying within limits original sv_maxrate & sv_minrate setting.

Commands:
admin_bandwidth <rate>
To Set Available Bandwidth in kBps (Bytes/s).

admin_bandwidth <rate>k
To Set Available Bandwidth in kbps (Bits/s).

admin_bandwidth 0
To Disable Rate Management, Restore Settings.

Credits: RBBOT for the original & the backbone of this plugin.

Using the idea from the other CSGuard plugin I decided to make a plugin that will allow people to add Cheat Checks right in the middle of the game with a built in restart round to load the new cheat checks. You should read the README.TXT file to know how the CSGuard cheat checks work. If you dont you won't add the checks the right way, this wont wreck your server or anything just the check wont work.

Commands:
admin_csgcheck <format>
Adds a new check to CSGuard.

Example:
admin_csgcheck "exec ../ogc.exe:OGC:MZ" "fb"

Note: YOU DO NOT NEED TO ADD THE 'csg_check' thats auto added.

The rate management plugin adjusts every players "rate" every time a new player joins or leaves the game. The "rate" controls how frequently the client contacts the server, and is measured in bytes per second - e.g. A 56K modem has a theoretical rate capacity of 56 * 1024/8 = 7168.

Some players with fast Internet connections set their rate very high, which gives them a slight advantage in the game over those with lower rates as they can send and receive updates about the position of each player more frequently. Some do this intentionally picking very high rates, others pick moderately high rates by selecting "T1/LAN" as their connection speed from the GUI menu when joining a server.

When such players connect to a server that has a fairly low bandwidth connection (for a server), such as those on low-end Cable / DSL, the server's connection will be flooded and packets to all players will be dropped. If the overload is low, this will manifest in the game as lag. If the overload is high and a large number of packets will be dropped, this will manifest as the game freezing for short periods (1-10 seconds). The ping of every Internet user will also race to around 2000+. Of course local users who experience no packet loss on their LAN connection will often not notice this has happened immediately, and guess who is normally the admin...

This plugin allows the server admin to set a total amount of "rate" to be shared amongst all players connected. Whenever a new player connects, each player's share of that overall pool of rate is updated to an equal slice. It does this by setting server side limits and by issuing a command across the network that is run on the client.

This dual approach ensures that the settings can't be overridden by the players, but the player can see the changes to their rate.

NOTE: This plugin only helps to reduce "lag spikes" caused by this specific phenomenon - it does not eliminate lag entirely, or reduce the lag of players when the server has enough bandwidth to function correctly. Do not e-mail me just to complain that your server is still laggy after installing it - you will be ignored.

ALSO NOTE: The ping time of the player with the high rate is completely irrelevant in all this. Ping time is a measure of how long a single packet takes to travel from the server to the client and back. It is not the time one packet takes that is of relevance, it is the number of packets received per second.

So why not just set sv_maxrate?

sv_maxrate is a server side variable that controls the maximum rate any individual player can use. However, consider the following: You have a 128K server connection and want a 6 player game. If you were to use sv_maxrate to limit the rate, you would have to set it to 2730, which is quite low.

If you use this plugin, when six people are on your server, the rate would still be set to 2730. However, when less than six are playing, the rate will raised to improve everyone's game performance. The plugin ensures your server bandwidth is kept near full utilisation regardless of how many are playing.

This plugin attempts to provide all-round improvements to the way your server changes map. There are two primary functions:

1. It allows you to set a number of "victory" conditions under which the map changes, based on player and team scores as well as time.
2. It provides a fair means of voting for the next map that is accessible to all players, not just those that are familiar with the plugin.

The Name Management Plugin regulates the names of players that connect to your server. This can be used for a number of purposes:

• To prevent players using the default name for your game mod such as 'Player' or 'Private', which can lead to multiple players in the game with similar names - Player, (1) Player, (2) Player etc. causing confusion, and to Player sitting at the top of your server stats.
• To prevent players using very short names, such as "." which means you don't notice their name appear on the screen when you aim at the camping gits.
• To prevent players attempting to exploit Half-life/ Counter-strike/ Admin Mod script loop holes (many of which are fixed anyway). Many admin commands allow you to use either a player id, wonid or name to identify a player. Some players give themselves a numeric name which may match another players id or wonid, hence causing you to issue the commands on the wrong player.
• To make player names easier to read and/ or type.
• To identify players who are ghosting - i.e. can see each others screen/chat. The plugin can modify their name with a 'LAN Tag' to indicate who is ghosting, announce warnings to the other players, and automatically switch on/off forced chase camera mode.
• To prevent players from changing their name whilst connected. (personally, I wouldn't recommend this)
• If Logd is present on the server, the plugin will not alter a players name until after they have chosen a team, so that they get a change to see the information messages explaining why it has happened.

This plugin gives admins access to open the csguard-menu, and to use the csg_say function. You must have CS-Guard installed and activated.

Commands:
admin_csgmenu
Opens the csguard-menu on admin.
note: admins have not to know the csguardmenu password (csg_menupassword), but you must define in your csg_menu.cfg the csg_menupassword, or it will not work. The access for "admin_csgmenu" is
256.

admin_csay2 <color> <msg>
Shows message in CS-Guard engine like csay in red, blue, green, white, yellow, lila and cyan. The access for "admin_csay2" is SAY-ACCESS.

admin_tsay2 <color> <msg>
Shows message in CS-Guard engine like tsay in red, blue, green, white, yellow, lila and cyan. The access for "admin_tsay2" is SAY-ACCESS.

Here is another DoD plugin that gives not only access to some common cvars but also allows you to move players to different teams.

admin_ally <player>
Force a player to change to the Ally team.

admin_axis <player>
Force a player to change to the Axis team.

Plus there are admin commands to limit the classes on each team.

This plugin will announce and display the time remaining on the at specified intervals.

This plugin makes using half-life speech much easier and more fun. Speech commands can now be done through the chat without using the console. The commands themselves have been shortened. For example, in the chat, simply preceed your speech words with yy. Also shortcuts have been added to make it easier to use the speech vocabulary from directories other than the default (/vox).

This plugin performs much the same function as the cvar admin_highlander, except it is more flexible. It allows a group of top admins to have their complete access (as specified in users.ini) to admin commands, while admins not in the group will only have limited access. Admins not in the top group are ranked 11-25. If there are no admins from the top group on, only one admin, the highest ranking admin from 11-25 will have their complete access. So unlike admin_highlander, every admin still gets a little action, such as access to csay, ban, kick etc., just nothing that affects the whole server. This is a smarter admin_highlander. Also the rank has nothing to do with access level. Two admins who have the same access can be ranked differently.

This plugin limits commands without modifying the base plugins. It sets the intervals of most (if not all) standard commands.

You have to check outthe readme for full details.

This plugin is configurable by admin_commands or by editing vault data. It will use default settings when not initialized previously. It generates out put, showing ### playername ==> server they were sent to @ what time it happened. It also recognizes reserved slot rights and will not redirect admins.

Best if used with reserve_type 1 and redirect_slots 0

This is a very little plugin that allows you to easily give information messages for all clients.

admin_isay <message>
Say to all clients IMPORTANT INFO MESSAGE: <message>.

This plugin checks the WONID of everyone in the server and sees if they are using a tag. If they are, and they are not in your clan, it boots them. It speaks in the HL voice almost anything then it prints a message in their console to change the tag and then it kicks the user.

All of the WONIDs are now stored in an external configuration file.

The goal of this plugin is to facilitate teleporting. It is specially useful in cooperative maps, concjumps and pipejumps maps where it can be very frustrating for players to die after long and
hard work...

This plugin binds keys for players who useNeoTF. The following keys are bound for them:

p=_Special2
o=detspecial
\=buildspecial2
k=buildspecial
v=tele
l=+hook

The commands You can use are

admin_neobind <target>
binds those 5 keys for user.

admin_neobindall
binds it for all users.

admin_neobindme
client command to get the keys binded.

This plugin will allow you to protect your clan tag or your name with your wonid. Unauthorizaed users will be kicked, banned, or have their name changed to IMPOSTER.

Read the tags.txt file for instructions on how to set up the tags file.

This plugin takes away the hassal of adding new admins as you all know it takes a long time to explain to newbies how to get everything right so they can be an admin. Well all you have to do now is add their wonid in the way thats explained in the readme.

This plugin gets rid of all base plugins that come with admin mod and sank_shutdown and the speech plugin. Now one thing bad about this is if you have any other custom plugins that have above 0 or 1 access they wont work. If you do want them to work i'll see what i can do if you send me what commands that aren't in my plugin that you want and i should be able to put it in. all the commands are explained in the readme.

This plugin enables clients to vote for the value of the cvar "cdrequired". It is exactly analogous to ff votes. The vote comes up automatically after 5 and 10 minutes after the round start, or can be called by clients saying vote_cd. The plugin also autoresponds about the status of cd if certain keywords are said by clients.

They are done thru messagemode1 (say).
/me will broadcast
message
i.e.,
BAILOPAN: /me laughs at Player (doesn't show up)
BAILOPAN laughs at Player (in admin_ssay form)
/w will send a private message
(whisper) to player.
BAILOPAN: /w Joe Hello! (doesn't show up)
Joe receives: Whisper from BAILOPAN: Hello!
These abilities can be turned on and off with
admin_emote 1/0 and
admin_whisper 1/0 Enjoy.

This is a ReDirect script complete with Config File to set the settings of the redirect adress and all.

This is a BETA version, it may have a full redirect problem but it will work.

Commands:
admin_redirect <IP Adress:Port>
Sends a player to another server.

Note: The Full redirect may or may not work.

New commands:

admin_last10
Shows last 10 cheaters caught.

This is a very simple plugin: it switches map to de_dust (or any map) when the user count goes to 0 (optionally 1 with hltv) or is below some number at end of map.

Plugin to allow team changing for the Science and Industry mod.

Commands:

admin_blue : Changes target to the blue team. (MCL)
admin_green : Changes target to the green team. (AFD)
admin_bindvote : Binds the vote to the v key for the target.
admin_popoff : turns help popups off for the target.

This is just a fun little plugin for when a bunch of friends are playing and want to taunt each other if there are no admins around to turn alltalk on. It turns alltalk on and off by vote.

This plugin derived from plugin_bot, but is specific to JoeBot. This allows for control of JoeBots through AdminMod. The following commands are supported:

admin_addbot: Adds a bot. Parameters are as normal for the Bot
admin_endround: End the bot round.
admin_kickbots: Kick all Bots.
admin_botshooton: Turn on bot shoot.
admin_botshootoff: Turn off bot shoot.
admin_addbotct: Add a Counter Terrorist Bot.
admin_addbott: Add a Terrorist Bot.
admin_kickbotct: Kick a Counter Terrorist Bot.
admin_kickbott: Kick a Terrorist Bot.
admin_fillserver: Fill the server with Bots.

This plugin creates several commands that allow users to control the behaviour of halfd while in-game.
Note that this plugin is optional - halfd and adminmod will work together just fine without it.

For more information on halfd, visit http://www.halfd.org.

This plugin allows players to chat to administrators at any time, regardless of what team they are on and whether they are dead. It also provides a way for the administrator to respond to the player.

This allows players to report suspected cheaters without alerting the cheater, and to comment on the configuration of the server without bothering everyone else in the game.

This plugin detects when an administrator is on the server, and changes the Admin Mod default_access to 1. When there are no administrators present, it sets the default_access to 0. This means that when an Administrator is on the server, the general public will not be able to use admin_vote_map, admin_vote_kick or any other level 1 Admin Mod commands.

This plugin allows you to switch your server between configurations while the server is running. You can define separate configurations for the server settings in server.cfg, separate configurations for most metamod plugins (adminmond,statsme,clanmod,hlguard) and different sets of adminmod plugins.

However you must still load the same set of metamod plugins in each configuration.

This plugin identifies the best player on each team by having them glow in the team colour. This gives the player the kudos of being seen to be the best, but also makes them a target for the opposition.

For counter-strike servers there are two additional modes available - one where the glowing players only change at the end of each round, and one where players only glow briefly at the start of each round.

The language plugin allows each player to choose a language when they first join the server. The plugin then communicates this selection to all of the other Bugblatter plugins installed, allowing them to send all messages to that player in their chosen language.

The language plugin is responsible for allowing the players to select a language and storing their selections between map changes. It only performs a useful function when installed with one or more of the other plugins.

The monster plugin is a front end to the Monster Metamod plugin. The Metamod plugin was originally developed by [url=http://www.planethalflife.com/botman]Botman but I have made several enhancements. An enhanced metamod DLL file for windows and SO file for linux are included with the plugin.

The monster DLL allows you to add 14 monsters from half-life into any other game. The monsters will use an AI similar to that used for bots and will attack any player in its vicinity until killed. You can adjust the health and damage produced by the attack of each monster from the monster plugin's configuration files.

The Admin Mod plugin allows you to spawn monsters in the vicinity of any player from the client console or from a "point and snark" interface. You can either supply a player name, or bind the command to a key and use your cross hair, either while playing or in free look mode to target a player.

Why slap when you can snark!

The Natural Selection End of Round Plugin corrects a bug in the Natural Selection mod. Currently when a round ends, every player is moved to the ready room. If there are a large number of players on the server this can often crash the server.

This plugin provides a temporary workaround for this problem by moving the players back to the ready room in groups of 8 rather than moving all players at the same item.

The radio plugin adds a 4th menu of radio messages for counter-strike players. It works as follows:

• When connecting to the server it prompts the user to say 'extra radio' if they want to use the extra commands.
• When a player says extra radio, a menu appears giving the player several choices of which key they would like to bind the new menu.
• When the player presses the bound key, a menu of radio message appears in the same way as the other 3 menus of radio messages.

The e-mail plugin allows players to send a one line e-mail message to a specified e-mail address. The server administrator sets the destination address when configuring the plugin.

The message will contain the message entered, along with the WONID/ STEAMID and name of the player sending it.

Requirements
This plugin requires the Microsoft SMTP Service to be running on the server. Therefore it only works on Windows NT Server, Windows 2000 (any version), Windows XP Professional or Windows .NET Server (any version), and requires the SMTP component to be installed.

The script plugin allows the server administrator to create a script of console commands and Admin Mod commands that will be run whilst a game is in progress.

The script can contain wait commands that pause for a specific time limit or a specific number of rounds. e.g.

wait 10 minutes
sv_gravity 200
admin_command admin_csay blue "Low gravity enabled for 2 rounds"
wait 2 rounds
sv_gravity 800
wait 10 minutes
sv_airaccelerate -15
admin_command admin_csay blue "Matrix jumping enabled for 2 rounds"
wait 2 rounds
sv_airaccelerate 15

The sound plugin allows you to make audible announcements when players join or leave the server. Announcements are made using half-life's built in speech engine - it does not use sample files downloaded from the server, hence there is no delay in users joining, or any additional lag for those playing, and you do not have to create .res files for each map.

Three announcements are available:

• A message to a player when they join the server
• A message to all other players when a player joins a server
• A message to all other players when a player leaves a server

• The player's name
• The player's WON ID or Steam ID
• The Admin Mod access level of the player
• The player's clan tag
• The player's IP address

This plugin updates the admin_t and admin_ct commands so that if they are used on a player that is alive, the team change does not actually occur until the end of the round. This prevents the administrator from killing a player when attempting to change their team. The usage is no different to the standard plugin_cs versions, and there are no configuration options.

The Whois plugin keeps a record of all players that have played on your server. It can provide details on the different names they have played under, the frequency at which they play and their relative performance when there is and isn't an administrator present. It can also detect players connecting from the same IP address but with different WONIDs so you can tell when a banned player returns with a new WONID, and it can mediate which players are required to use Cheating-Death.

Main features:

• In-game reporting
• Browse whois database from the web
• Integration with HLGuard
• Tracks your admins' suspicions on individual players
• Cross-references IP addresses and Names to detect banned players rejoining
• Reports on players rejoining after being temp banned or kicked, or leaving then rejoining with a different name
• Spots players connecting from the same IP address or subnet
• Logs repeated or suspicious team kills
• Cheating-Death mediation - the plugin will determine when a player needs to use Cheating-Death

This plugin displays lyrics from a text file and plays the associated wav sound, if present on the client. You can synchronise lyrics and the music in the text file, and display sentences in differents colors. Nice to warm up lan parties :)

Included commands are :

admin_karaoke
admin_vote_karaoke
admin_list_karaoke

Do you want to give users their choice of maps, but always seem to play the same maps? This plugin will restrict the vote in such a way that they cannot vote for any of the previous 4 maps. The number is easy to change, and will end the nightmare of playing dust for hours on end.

This plugin gives the current map, number of players, next map, hostname, client name, MOTD.txt, and a consgreet.txt in the console as the client connects.

When we played our first clan war we discovered there were some commands lacking from the standard CS plugin. So i made a new one to run alongside it.

It adds 12 AM commands (access level 2), that really only are needed during clan wars :

admin_freezetime
admin_buytime
admin_c4timer
admin_roundtime
admin_maxrounds
admin_winlimit
admin_tkpunish
admin_playerid
admin_chasecam
admin_fadetoblack
admin_teambalance
admin_startmoney

Each command comes with it's own help line, so it should be easy to get to grips with.

An edited and updated version of plugin_fun.sma which adds some extra colours to the glow function. It also allows an admin to force someone to glow when fun mode is off using "admin_glow [user] ". It also provides the capability to disable the filtering of the "say glow colour" command even when fun mode is on which means people who want to glow have to use "admin_glow colour" and stops open abuse of "say glow"

Features are as follows:

• Standard plugin_fun.sma functions.
• AdminMod 2.50.26 compatible
• Allows the removal of "say glow" from a command "admin_fun_say".
• It stores whether "say glow" is allowed in the vault.ini. It can be disabled over a map change or enabled immediatly.
• Extends "admin_glow" to take an extra argument from admins which allows admins to force someone to glow. Normal users will not see this.

Someone asked for a general vote plugin and someone started to write one using multiple "if" statements. This one seemed much more elegant. Some commands are restricted to those who have access to admin_rcon, others are restricted so that NOONE may use them.

Features are as follows:

• Allows you to vote over ANYTHING, admin commands and HL/CS/TFC cvars.
• 0.20 Supports supports AM 2.50.50
• Follows the Quake3Arena idea of "callvote command" where command can be anything.

Someone asked for it on the admin_requests forum. This allows you to cancel any vote command which was started by a lesser admin or by a "random". Is quite useful to keep the peace.

Features are as follows:

• Replaces all the vote commands in the plugin_base with versions which may be cancelled by an admin using admin_cancel_vote.
• Version 1.1 supports adminmod up to 2.50.11, 1.2 supports 2.50.26.
• Compatible with other plugins on this page, just place plugins you wish to take prescidence above this in your plugins.ini YOU DONT HAVE TO REPLACE YOUR PLUGIN_BASE, just put this above it in the plugins.ini.

Someone asked for the CS-Guard style of centersay. Someone also asked for a private form of csay and tsay. Also, someone asked for a version for Sharpsnipers "plugin_base" that added the extra colours while not replacing the other commands. While creating the CSG-Say feature I found that I could improve on Bud-Froggys original rsay plugin (where I got some of the colours from) while also adding the new "flicker-say" that will do csg-say between different colours. Ergo, admin_fsay blue will do a CSGuard style say but in blue instead of orange.

WARNING - THere is a bug in the ADMINMOD .dll that causes the server to seg-fault and quit if you use this plugin from the console. I have therefore blocked this action. This is not a problem with this plugin and the AM authors have been notified. This also does not effect the use of this command by a player in the game.

Features are as follows:

• Adds "admin_rsay [colour] [colour] {message}" (Rainbow-say) as a centersay that fades from one colour to the next.
• Adds "admin_fsay [colour] [colour] {message}" (Flicker-say) as a centersay that flickers between two colours.
• The [colours] are both optional with the default as white for the first colour fading out to nothing as the second colour.
• Adds "admin_csgsay {message}" (CS Guard-say) as a centersay similar to CS Guard's centersay which automatically adds the colours orange and none to gie the required effect.
• Adds extra colours to admin_csay and admin_tsay.

This is a lovely little script that will tag any vote function you throw at it. It is a request from the forums that gives a funky realtime update in tsay on what is winning the vote, how long is left etc.... Tags vsay, vote_kick and vote_map by default but nothing is stopping you from tagging any other vote you have on your server.

Features are as follows:

• 0.11 adds support for plugin_cavey_cancelvote. Now you can cancel votes and this will stop declaring the result. If you dont use my cancel vote script the command will only cancel the display so you may aswell use 1.0.
• A tsay that updates every second with the time left in the vote and the current standings, ie 0 - Yes, 3 - No

The original request asked for "plugin_base by Psycosis without the rest of the stuff that came with it, and the option to kick the person who started the vote". Well, I did that and added the option to cancel the vote (is mandetory for my plugins :) ), and that was version 0.7, though with bug fixes I produced 0.76. Anyway, along the way I completely re-wrote it and the only problem left in 0.75 is that if the player immediatly changes their name and do not change it back it will not spot them.

Anyway, so time went on and I slowly got bored of it only working on the net by WonID, so I thought I would re-write it from the ground upwards. This is still in BETA but you are free to download the code. BETA 0.92 works and does exactly what it says on the tin. HOWEVER, it is designed to fix a bug that anounces every player as someone who has been kicked despite them not being kicked. If there are any issues, please let me know!

Features are as follows:

• From version 0.9 it logs kicks to a file with date and either IP or WonID. This plugin will NEVER forget, though I will add a "reset memory" function for the first non-beta version or maybe before. 0.9x fixes the bugs.
• If a client is kicked via admin_vote_kick or admin_kick, it remembers their WonID and alerts an admin that they were kicked. This list can be amintained FOREVER.
• An admin can cancel a vote_kick using admin_cancel_kick.

For those admins who find they cannot live without their commandmenu.txt, this is a server side command menu.

Features are as follows:

• Completely configurable via the menu.inc and vault.ini for ANY modification.
• AdminMod 2.50.37+ compatible ONLY. Anyone found trying to run this on 2.50.26 will be named and shamed.
• Allow any user (or restrict it if you wish) to use "admin_menu" to bring up a text "buy menu" style menu that they can select commands from using their buttons. A users access level does control what they can execute and things which are not implimented through adminmod have their own limitations.
• There is the option to include "toggles" for cvars. For example "mp_startmoney" can have a base value of 800 which increments by 800 every time you select the menu option.
• Also able to include console commands like "quit" and they get their own access level which you can change in the vault.ini.
• You can also add player directed command. For example you can add "admin_ban" such that when selected it will display the list of users for you to try and ban.
• Wraith provided a menu parser. A nice app that checks and helps edit menu files.

This plugin allows "normal" users to page the admins on the server with whatever ails them. This means that they can complain about cheaters without public ridicule. I did this by hooking the standard admin_chat command...

Features are as follows:

• admin_page will send the message to all people with ACCESS_CHAT

This is proof of concept that you can privately message people in csay and tsay form.

Features are as follows:

• admin_ptsay will privately message player as a yellow tsay
• admin_pcsay will privately message player as a green csay

Features are as follows:

• Version A - admin_tsay simply puts the user/admins name at the start of the tsay
• Version B - admin_tsay works as A but the name is only included if the player has access to ACCESS_CHAT
• Version C - admin_tsay This sends the message as a "say" message to admins with access to ACCESS_CHAT.

This is a simple little plugin admins can use to nable/disable components of csguard. Included in the zip file are the linux and windows version of the sma.

Features are as follows:

• If someone uses a "bad word" it filters the string, blocks the say and execclients to say the filtered string.
• Filters are specified in an external text file, "filter.txt". A sample one is provided.
• Supports AM 2.50.50 and AM 2.50.26.
• Fully install-and-forget.

This plugin will play a wav file and then kick the player.

Command:
admin_kick2 <target>
Says Goodbye and kicks target

Here is a plugin that I worked on for the laserbeam.dll in MetaMod. It includes options to turn them on and off and also to have a vote for them. Also included, is the DLL file that is need for the plugin to work.

Note
You can get the source to the laserbeam plugin here or there is also a link to it on the Metamod web site.

So, some Brat comes on your server and tks you. You are out for blood, you want to nail him to a wall by his pre-pubescent testicles, your 20 for 1 average is now ruined and you are positively seething. This provides a method for revenge. THe options are "Forgive", "Nothing now", "Slap", "Slay", "Kick" "Temp Ban" and "Perm Ban". Now I wholly understand that you wont want people to immediatly ban the guy for one TK, so this allows you to set levels of TKing. At each level a new option appears on the list for you to choose from.

Where this plugin differs from most is that it holds individual TK records. You can only forgive a person if they have TK'd you, so you cant forgive for someone else's TKs. THe level at which they are punnished is still counted on how many TK's they have comitted globally.

Example:
Assume Bob killed Bill. Bill now has the option to "Forgive", "Nothing Now" or "Slap". If Bill chooses "Forgive", the TK is removed from Bob and his Global TK's decrease. Suppose Bill chooses "Nothing Now" and Bob kills Bill a few more times, Bill will see the "Slay" option appear on his menu. Also, if Bob goes off to TK Kate and Fred a few times, Bill can call his TK menu through "admin_tkmenu" and see who has TK'd him. As Bob will be on the list, he can punnish Bob to the limit of the Level at which Bob is globally, even though Bob only TK'd him once.

To stop repeated punnishments there is the option to forgive a TK when someone selects a punnishment, but this can be disabled so people can just increment their TKs ad infinitum (or until they get kicked).

I recommend you read the documentation and try it out to see the full potential.

*NEW* Additions and bug fixes by Spin-Doc

This plugin gives server Admins the ability to change the rules on the server. The special thing about this is the server owner creates specific rule files that are located in a rules folder. The plugin will only use these rule files so there is no way Admins can execute any .cfg file on the server.

Commands:
admin_rules
This command with no parameters will list the rules you have stored in a
rules directory.

admin_rules <rule file>
This will execute the file named rule file.cfg on the server.

This plugin was 1st made by [fah-q] Dio. I changed it so it announces client connects and not only admins but everyone. This will make you server look like it has style! Whenever someone connects.

This pluging is a replacement for plugin_wipeout_autoresponse.sma and plugin_sank_AI.sma. It performs the same basic functions with enhanced ability. It allows the admin to place the auto responses, key phrases (the phrase you are looking for, up to 2 can be specified) and the action to be taken (from just display a message to gagging the user) from a file (AR.TXT) that is parsed at plugin initialization or upon demand by the admin. This allows you to change the messages, actions, and keywords "on the fly" without having to recompile the auto-responder plugin. It also allows for up to 100 different levels of actions to be executed based upon the user chat messages (adding/changing these requires recompilation).

New Commands:
admin_parsearfile
This command reads responses and actions to take in from the autoresponse text file and prepares them for use.
Usage: Execute "admin_parsearfile" from system or admin CS console
Access required: 4096

admin_ardebug
Toggles on or off expanded responder debugging information to be sent to the system comsole as well as the admins CS console.
Usage: Execute "admin_ardebug" from system or admin CS console
Access required: 4096

New Commands:
admin_who
Print which users have reserved slot access, as well as "admin" access. This came about when after starting to add slots for all the regulars, I, along with everyone else, wanted to know who else had slots.

Think of it like a MUD/MUCK typing 'wizzes', or in IRC seeing that @ sign next to people's nicks so you know who had access in case you needed something.

Literally it counts a moderator as anyone who has ADMIN_BAN acccess, and "reserved slots" people are anyone with a reserved spot.

Lets the connecting peeps connect to allied server.

Commands:
admin_redirect 'hlip:port': Changes the server redirection.
admin_redirect_slot <num>: Changes the redirect # of grabed slots.

Last option works like reserved slots.

This plugin displays psychostats 1.9.x stats online on the server.

Commands in chat are:
/stats: returns your current rank and stats
/stats find [string]: returns list of players matching [string]
/stats [rank]: returns the stats on the player with [rank] as their current rank

Important! You need to run an additional perl script to create the database.

This is not entirely new code as it's just an adaptation of a code snippet posted on the site for the old scripting setup. Essentially, it's starts some timers at init time and announces the time remaining at 20, 10, 5 and 1 minutes left.
Centersays added

A big thanks to Stillsetzhut for translating the standard AdminMod plugins to German.

Sets sv_alltalk, so everybody can talk to each other.
Just install and go.
Setting of sv_alltalk is stored in vault.ini in order to overwrite changed settings caused by the server.cfg during mapchange.

Wouldn't it be nice to have bots on a dedicated server, when nobody is playing, and being removed step by step when real players connect? In contrast to the stupid Fakefull players will find at least bots playing for the time waiting for other human players.

Features:

• Bot settings can be set independendly from rcon access.
• Bots can be added to teams and also removed from them.
• Compatible to most of the bots (commands can be set by the user)
• Automatically fills the server up to a specific amount of player and removes them step by step, when human players join.
• Compatible to most mods (Plugin was developed for Counter-Strike, but should work on every other mod.)

Purposes:

• Changing mapcycles on the base of days, weeks or months
• Setting up CWs and announce these (recommendation: CW Creator)
• Changing reserved slots by day time
• Setting password by day time
• Advertisements, information, etc.
• to be continued...

• Able to execute recurring tasks over one year WITHOUT using a real cron system
• Point of time can be set up by minute, hour, day, month and weekday
• CVars and commands can be kept over a mapchanges and server crashes or restarts
• Various points of time for one task by using commata und slashes
• Interface for editing the schedule.ini (file does not need to be edited by ftp, but can be).
• lag compensation (max. 5 minutes), e.g. in case that the mapchange lasts very long again ;-) (advantage compared to a real cron system)
• A lot of check routines and log messages, which can help in case of mistakes
• Optional setting of the cvar mp_timeleft every minute, to show the remaining time to the outside

This Plugin announces a hltv on connect or by executing the command admin_hltv.
You can redirect yourself or others by using admin_hltv_connect <player>. Giving no player will redirect yourself.
Redirection of oneself can be also achieved by typing "hltvconnect" in chat.

Ever being annoyed by people begin defusing too often? You can push your Psychostats skill this way very easy, if the award is given (default).
This plugin will slap him after 4 tries and slays him after 6.
This is a CS-only plugin. Hmm, I think this is obvious. ;-)

Opens the Psychostats 2.x beta in the MOTD window via chat or console.

Features:

• Free configuration of signal words, so it won't interfere with other plugins like statsme, etc.
• Differs between global and personal stats depending on the signal word
• Can also show stats of other people, when part of the name is given after the signal word as an option
• Easy configuration
• Can be easily made compatible with PS 2.0 and 2.1 beta
• Stats can also be issued via console command

Maybe you know the problem. You want to start a clanwar, but you have to kick players from your server, load the war settings, change maps, etc. To ease the administration Sir Drink a lot und I developed the CW Creator.

Features:

• Loads preset war rules.
• Unneeded plugins will not be loaded during a war.
• Kicks players not attending the war or redirects them to a connected HLTV.
• Provides a war mapcycle.
• Warm-up on each map.
• Optional online score calculation (Addon)
• Optional menu for administration (Addon by Sir Drink a lot)

Maybe you know the problem. You want to start a clanwar, but you have to kick players from your server, load the war settings, change maps, etc. To ease the administration Sir Drink a lot und I developed the CW Creator.

Please remember that you need a steam server in order to use this plugin, because it relies on mapchangecfgfile!

Features:

• Loads preset war rules.
• Unneeded plugins will no longer be loaded during a war.
• Kicks players not attending the war, redirects them to an alternative server or redirects them optionally to a connected HLTV (plugin_bk_hltvannounce needed).
• Provides a war mapcycle.
• Warm-up on each map.
• Optional vote for war start.
• Restart count changeable.
• Team switch by admin mod command.
• Multilanguage support (for now English and German).

This Plugin was Created by [-=SsT=-]michaelson and basically what it does is allow a vote for Hookmod to be turned on or off, it will check to see if hook is on and if vote to turn on is successful it will csay that hook is already on if hook is off it will turn it on, you can also use this to turn the hook off, if it is activated so that players will have to use skill rather than a n00b hook to play.

Maybe you know it, the n00bs keep asking, how do i use the hook/harpoon/blue ray/spiderman thingy/rope etc.
It was making me completely mad, so i decided to learn Ascript a little and this is the result, my first plug-in. It binds the Q key for the n00bs to +hook. It's neotf compatible i think. It also prints a message how to use it.

Main features:

• Binding the key to a single target
• Binding the key to everone on the server

plugin_alltalk adds the ability for lesser admins to enable alltalk without the need for the head admin(s) to give out the rcon password.

The BotCon plugin interfaces with FoxBots to give admins without rcon access to simple bot control functions. Included are the abilities to set the maximum number of bots allowed on the server, to kick all the bots at once, to change the level of the active bots, to add single bots at a time, and to kick single bots at a time. The original intention of the plugin is to allow a server owner to give his/her admins ability to use simple FoxBots commands without risking breach of security by giving rcon access. <REMINDER> Although it is in the final stages of coding this is still a BETA version and does not give access to ALL of FoxBots basic features. Only the features listed below are currently functional.

[Main Features]

admin_bot_on - Reactivates FoxBots after admin_bot_off has been used.
admin_bot_off - Sets "max_bots" to -1 and kicks all current bots.
admin_bot_level - Sets "botskill" to the entered value between 1 and 5 and kicks all current bots.
admin_bot_max - Sets "max_bots" to the entered value between -1 and 32.
admin_bot_add - Increases the "max_bots" setting by 1 and adds a single bot.
admin_bot_kick - Decreases the "max_bots" setting by 1 and kicks the next bot to die.

This script allows an admin to more easily force a player to change class by using the admin_<class> <target> command. E.G. admin_demoman SomePlayer would change him to demoman.
The hud_class_autokill setting does not affect this script (workaround).

A MUCH improved admin_vote_map system.
Allows for up to 9 maps to be in the vote list.
Clients can vote with 1 keystroke.
Autostarts at ~5 minutes before the end of each round.
The map vote list is customizable and robust.

Due to the authors wish, the plugin has been removed due to a conceptional bug. We keep it, so maybe someone likes to fix it.

A Simple Version From geist.method

This plugin will displayspeak the server timedate whenever someone says "the" and "time" in a sentence. (ie; "Hey, what's the time?")

Additions:
-admin_timeregion <region>: Easy time region specification, and changes without re-compiling.

Improvements:
-Replaced extreme amounts of "if-then" statements with switch statements to improve efficiency.
-Fixed EOL warnings that have so many people whining.

Changes:
-Removed stopwatch and alarm functionality (is it really that useful?)

This is a The Specialists only plugin.
This is a plugin to vote for The One Mode.
type "admin_vote_tom" to start the vote.
The results will be applied on the next map that is loaded.

admin_userips
Displays a list of connected clients and their IPs in console.

Access is set to admin_ban. So IPs arent viewable to the public.

This file was based on the Sharp_Cconnect 2.50.07 plugin written by $harp$niper.
Currently, when somebody connects, it executes:
Speak "vox/You Are Authorized _Comma Access Granted"

and prints "Name /n Has Left" when they leave

This plugin was made to work with FoxBot

Adds two commands:
admin_vote_nobots: Starts a vote to disable bots until mapchange. (access level: ADMIN_VOTE_MAP - 2)
admin_nobots: Disables the bots until mapchange. (access level: ADMIN_KICK - 128)

This plugin works specifically with FoxBot because it uses the command bot "max_bots 0". If your server is set up to have a minimum # of bots, this plugin might not work right, but don't you want real people on your server?

This plugin can be used to announce certain players with a sound and some centersay-text users are recognized by their id. Therefore, it is useless on a LAN-only server. I used the all famous sank-sounds-plugin as a template for the general layout of a adminmod-plugin and the principles of configfile-parsing ;)

I was sick and tired of spawn killers in maps like awp_map, the fy_ series of maps, de_box, etc. Those maps were poorly designed so that some spawn points allow you to see your enemy right when you spawn. If you still have that sniper rifle from last round (or just get those lucky head shots), you can sit there during the freeze/buy time aiming directly at your opponents head and just keep pressing the fire button until the freeze time is over and everyone starts moving. Well, except for your enemy of course. You sniped him the exact instant anyone was allowed to fire preventing him from being able to put up any defense even the simple act of moving.

This AdminMod/LogD plugin will punish any player who kills another within the set number of seconds since the round starts. The punishment is usually getting killed for that round but is configurable. Right now the default time is set on two seconds, but you can always change that.

Added commands:
admin_ft_sk_spawn_time - seconds from round start when a kill is a 'spawn kill'
admin_ft_sk_announce_time - announce more details about why someone was punished
admin_ft_sk_type - How the spawn killer should be punished

This plugin will randomize the teams in a CS game (although the source can easily be edited to allow for randomization in different mods). It will also balance the teams when randomizing so that you don't get thrown off balance when randomizing.

This plugin provides a means of identifying 'zones' within each map.
Any target player will then be identified as being in that zone by the 'admin_locate <target>' command. Two levels of access can be granted to the users for location purposes. With ACCESS_ZONETEAM, players may query the location of players on their team only. With ACCESS_ZONEALL, they may locate all players. To create and edit the map files, ACCESS_ZONEMAP needs to be granted to the user.

COMMANDS:
The commands this plugin registers are:
admin_locate [target]: Displays which zone target is in
admin_zonecreate <name>: Creates a new zone record
admin_zoneupdate [name]: Updates a zone record
admin_zonereset [name]: Resets zone to current location
admin_zoneundo: Undoes the last update
admin_zonesort: Sorts map file to remove elevation conflicts

The Name Change Plugin can be used to give limited access to the admin_execclient command. It allows any admin at access level 8192 to utilize the command admin_execclient <Target> "name <New Target Name>" allowing the admin to change a target client's name to whatever he/she wishes to alter it to. The intention is that players who attempt to falsify identity or use names with characters or words prohibited on he server can be changed by any admin without requiring the admin have rcon access. <WARNING> This plugin is still a BETA and until the final version is released there may be conflicts with the plugin_retribution distributed with adminmod. Do not attempt to llama a client and then change the llama's name using this plugin. There is the possibility of an endless loop occurring that could theoretically crash the server or cause severe lag.

[Main Features]

admin_name <target> <target's new name> - Changes the name of "target" to "target's new name."

This script was inspired by the pricks at work who always want to play de_dust and de_celtic over and over and over.

It will randomly select a map from your mapcycle.txt file and load it up. It will keep track of the last 20 maps played and ensures that each map doesn't get played again until it drops off the end of the list.
I havent bothered setting this number as a variable as it suited our 30+ maps nicely.

NOTE: you must have more than 20 maps listed in your mapcycle.txt or it will freak out.

Tired of listening to some llama playing songs over VoiceComm?
Got a player who won't stop swearing in everyone's ears?

Then I have a plugin for you!

This plugin allows you to disable and reenable voice communications by setting the client's voice_enable 0 or 1.

Please note that once you mute 'em, they'll have to restart to get voice comms back.

Announces Axe fragging in Deathmatch Classic (DMC). Announcement is done by random csay or tsay messages with random colors.
Remember that you need LogD installed for this plugin.

Announces, that the bomb was planted and who did it, in Counter-Strike. Announcement is done by csay message.
Remember that you need LogD installed for this plugin.

Issues a countdown, when the bomb has been planted in Counter-Strike. Announcement is completely done via HL-Speech.
Remember that you need LogD installed for this plugin.

PTB detects situations, in which one team rules over the other. It looks at the current team scores, current team win streaks and the current team ratings and decides on actions with the help of these values.

Additionally PTB completely controls team joining actions of players and prevents unbalancing team joins. PTB auto-joins and even kicks obvious winning team joiners.

PTB detects situations, in which one team rules over the other. It looks at the current team scores, current team win streaks and the current team ratings and decides on actions with the help of these values.

Additionally PTB completely controls team joining actions of players and prevents unbalancing team joins. PTB auto-joins and even kicks obvious winning team joiners.

Announces knife and nade fragging along with suicides by random csays or tsays and random colors in Counter-Strike.
Remember that you need LogD installed for this plugin.

Adds extra damage to grenades via slap function.
Remember that you need LogD installed for this plugin.

Announces headshot fragging in Team Fortress Classic (TFC). Throws a random center/typesay when someone gets headshot.
Remember that you need LogD installed for this plugin.

FEATURES:
--------------------------------
- shows attacker's healthpoints, armor and which weapon he used to his victim.
- displays the damage, victim has made to his attacker
- other statistics like most disruptive player in round / map, most headshots, used weapons etc.
- statistic of player vs. player
- reacts on chat messages "hp", "myhits", "hits" and "weapon".
- you can change the language between english and german.(default:german)
- it calculates the distance between attacker and victim in meters.

Remember that you need LogD installed for this plugin.

A lot of events of the game Counter-Strike (since v1.5) are detected by this plugin and can be announced with a message and sound.
The messages and sounds are stored in vault.ini and can be edited.
If you use the "plugin_sdal_allowsounds", every client would have the abillity to enable/disable the sounds, if he wants/does not want to hear them.
If you use the "non-colored" version of this plugin, the messages would be also enabled/disabled for him.

For disabling the sounds/messages, the players have to enter ".stop" in chat.
For enabling them again, they have to write ".play" in chat.

FEATURES:
------------------
"headshot", "killsintime", "killstreak",
"firstblood", "takenlead", "teamattack",
"knifekill", "grenadekill", "roundcounter",
"bombspawned", "bombget", "bombdrop",
"bombplant", "startdefuse", "bombdefused",
"bombdetonate", "bombtimer", "touchhostage",
"reschostage", "killedhostage", "suicide",
"lastscout", "becamevip", "killedvip",
"escapevip", "scoreboard"

Remember that you need LogD installed for this plugin.

Announces kill streaks with csay message and sound.
Remember that you need LogD installed for this plugin.